All AIA (pre-Camera Link) boards have been discontinued. This information below is provided for archival / reference only.
Most AIA Monochrome, Category 1, extended single channel digital cameras and some color cameras can be supported by the PCI DV and PCI DVa. A subset are also supported by the PCI DVK and RCX AIA (LVDS/RS-422). Cables and configuration files are available for the following cameras, which have been tested at EDT labs.
Be sure to check the cable list for your specific camera, as not all cameras are supported on all devices. Additionally, EDT’s framegrabber-end cables for the RCX LVDS/RS-422 modules are designed to connect only to EDT framegrabbers; connectivity for third-party FGs is only available by special arrangement.
EDT may be able to support other cameras — if your camera is not on this list, go here.
For Camera Link cameras, follow this link.
- E2V (formerly Atmel-Grenoble, formerly Thomson-CSF) Camelia 4M, TH79KA95, TH79KA96
- Cincinnati Electronics IRRIS-160ST, IRRIS-256LN, and IRRIS-256ST Infrared cameras
- DALSA CL-C3, CL-E2, CA-D1, -D4, -D6, -D7, D8, 1M30P, 4m4, BT25, 6m3, TR-33, PC-30, Piranha, and other area scan and line scan cameras 2
- Delta Design Delmed 2000 2
- DRS Infrared U-6000
- DVC Company 1300, 1310, 1312 series color and monochrome3
- Hamamatsu C4742, C4742-95 C4742-98, (ORCA), C4880-81/82, C8484, C79424
- Hanvision HVDUO-10M (Foveon sensor)
- Hitachi KP-F100
- Indigo Merlin and Phoenix Series Infrared and Alpha NIR
- Infrared Components MBC100, MBC200
- Kodak MEGAPLUS cameras (see Redlake)
- PULNiX TM-1010, TM-1020, TM-1040, TM-1300 TM-6700, TM-6710, and TM-9701
- Photometrics Sensys 0400, 1400, 1600
- Photonic Science CoolView 12
- Raytheon Amber Radiance 1
- Pyramid Vision PV-I
- Redlake MASD (formerly Kodak) MEGAPLUS Camera Models 1.4, 1.6, 4.2, 1.4i, 1.6i, 4.2i, 6.3i, 16.8i, ES 1.0, ES 310, ES 4.01
- Santa Barbara Focalplane SYS512S
- Scimeasure Little Joe
- Sensors Unlimited SU320M-1.7RT
- Silicon Mountain Design 1M30P, 4M4 and BT25
- Texas Instruments MC-1001PF1
- Uniq Vision Inc. UC-1030C Color1
- Xillix Technologies, Corp. Micro Imager 0400, 1400 and 1412
1. For simpler cabling with cameras that output straight-through with 68-pin connectors, PCI DVK can also be used.
2. Internal oscillator option may need to be installed in the camera. Dalsa D6 models require option OPT-DALSA D6 to the PCI DV. Contact EDT for details on specific models of DALSA cameras supported.
3. For simpler cabling, the 44-pin PCI DV 44 is recommended for this camera.
4. Requires PCI DVa RS-422 option